How
to install membranes
| How
to install membranes | |||
| |||
| Buy Direct online or ring us with your order - 01626 331351 | |||
| |||
| How to treat damp walls - Order and Free Technical Help - 01626 331351 - Kathy, David or Angela answers your call - discuss your building problem with a Qualified Dampness Expert (C.R.D.S.) | |
|
1. Wall Lining Kit - with welded on Mesh - for direct pastering or 'dab' fixing of plasterboard. Easy to install, plastic membrane - no rendering, no mess, no smell - easy DIY fix with bang-in plastic plugs, covered in mesh ready to plaster.
2. Wall Lining Kit - No Mesh - for 'battening' with timber fixed with screws into the plug heads, to then line with plasterboard. Easy to install, plastic membrane - no rendering, no mess, no smell - easy DIY fix with bang-in plastic plugs. Insulation can be fixed between the battens.
3. Floor Lining Kit - No Mesh - for direct laying. No plugs or fixings required. Uses Mastic Tape of Mastic Rope to permanently join sheets.
As used by the professionals - not all damp proofing membranes are made to these high standards - beware of cheap imitations. click here for a check list if you want to diagnose your damp Click here to see an actual installation in Non-Mesh Membrane using battens and plasterboard, including some curved surfaces membrane material - plastic dimpled sheet on a roll. Easy to cut and trim. plastering - plaster straight onto the welded-on mesh with ordinary Bonding lightweight plaster floor option - for damp floors, or basements use our membrane without the mesh - just lay chipboard flooring or screed directly onto the waterproof membrane Go
straight to Price List and Order Form * Optional Items: - Sump and pump kit - Drainage channel - 'Tanking' waterproofing liquid (SBR) - Certificate of Product Guarantee - Salt Neutraliser - Anti Mould paint . |
Drill through the dimples with a masonry bit - 8mm diameter
at 250mm centres Fit
the seal washer or use Mastic Rope provided in the kit to seal behind the head Drive the plug home with a hammer until the head is nicely flush, without buckling the membrane
Waterproof Membrane showing the mesh side, ready for direct plastering with normal 'bonding' plaster.
Wall and floor Membrane - no Mesh - for fixing battens to plug heads.
Plugs have holes for screw fixing (No.12 self tapper) of battens
Corner tape, for awkward joints and sealing junctions (single sided). As used by the Trade - Wall Lining Mesh Membrane is easy to fix on any type of masonry 1. Wall Mesh Membrane Kit includes 20 square metres of membrane - 2 metres wide x 10 metres long (Non-Mesh Membrane available is various roll lengths 2 metres wide, plugs, tape and rope to suit) 2. Comes with plastic hammer-in plugs and waterproof seals, ready to use 3. No special tools required, just drill 8mm holes. 4. Quick to install - just drill & bang-in the plugs 5. Ready to plaster - no risk of damp ever again, use modern paints and papers on your plaster with no risk 6. Effective - fully BBA tested and approved
Flooring
membrane being rolled out. Seal the overlapping joints with the Tape or rope. Waterproof Membrane with no mesh, ready for direct flooring - concrete screed or wooden floor using chipboard flooring.
Tape for joints, double sided - overlap the sheets by three rows of dimples.
Mastic Rope - sticky all round, for joints, dimple to dimple and for plug head seals. As used by the Trade - Membrane without Mesh can be used on floors or walls. On walls battens are fixed to the plug heads with screws, for lining with plasterboard, with or without Insulation.On floors the membrane can be 'screeded' with concrete or laid with chipboard flooring.
Property
Repair Systems
|
The
white plug has serations to grip the hole
