Property Repair Systems

01626 331351

Why we are different? Because we supply part rolls!

We assemble your chosen lengths of Membrane, quantities of plugs and seals, tape and mastic, to provide you with exactly the Kit you need for your Project - no need to waste money on complete rolls or full boxes - just give us the wall and floor dimensions and we will give you the most competitive price for your exact needs.

DIY Cellar Damp Proofing Membrane Kit - tough, easy to install, plastic membrane - no rendering, no mess, no smell - easy DIY fix with bang-in plastic plugs, covered in mesh ready to plaster.

Click here to see the fixing process for the Mesh and Non-Mesh versions.

Click here to see an actual installation in Non-Mesh Membrane using battens and plasterboard, including some curved surfaces

As used by the professionals - not all damp proofing membranes are made to these high standards - beware of cheap imitations.

click here for a check list if you want to diagnose your damp

membrane material - 2 metre wide plastic dimpled sheet on a roll. Easy to cut and trim with scissors or knife.

sealing and fixing - special Mastic Rope and Tape, with plugs to suit both wall fixing methods.

plastering - plaster straight onto the welded-on mesh with ordinary Bonding lightweight plaster

floor option - for damp floors, or basements use our membrane without the mesh - just lay chipboard flooring or screed directly onto the waterproof membrane

Go straight to Price List and Order Form

* Optional Items:

- Profile Strip for ventilation

- Sump and pump kit

- Drainage channel

- Certificate of Product Guarantee

For more DIY dampness repair products visit:

www.dampness-info.co.uk/

.

DIY - How to install a guaranteed damp proof course

First, check for high ground levels, leaking gutters and downpipes, water leaks. A Damp Proof Course must be at least 6 inches (150mm) above abutting ground level (whether internal or external), to avoid splash up or 'bridging'.

1. Drill 12mm diameter holes at 120mm intervals in the mortar course (or via the brickwork, angled down to meet the mortar course) selected to be at least 150mm above outside or abutting ground level

2. Fit the extension nozzle to the cartridge tube and load into the skeleton gun

3. Inject cream from the bottom of the hole outwards until the hole is full.

4. Replaster to our specification.

Treat any skirting boards or joinery with Boron Ultra Gel.

Holes can be capped with mortar or fitted with a plastic plug

Replastering to a minimum of 1.2 metres internally, to our specification, using sand and cement and Rendapruf integral waterproofer, is required to finish the job and to prevent 'salts' damage to plaster finishes and decorations.

Our Products required: Quick Cream DPC, Skeleton Gun - either a 400cc or professional 1000cc

Optional Products: Rendapruf Replastering Additive (5 litre), Wall Plugs, Boron Ultra Gel (2.5 litre), UltraProof exterior wall treatment (5 litre or 25 litre), Anti-Mould Paint (2.5 litre), Professional Skeleton Guns (400cc or 1000cc), Professional Extension Nozzle (for repeated use with 1000cc cartridges)

Tools Required: 12mm masonry bit, electric hammer drill, eye protection

Go straight to Price List and Order Form

.

Typical usage rates:

4.5 inch thick (115mm) single leaf wall - 1000cc (1 litre) per 9 metres, inject from either side

9 inch thick wall (230mm) double leaf solid or cavity - 1000cc(1 litre) per 4.5 metres, inject from one side or from both sides.

18 inch thick wall (460mm) solid or random fill - 1000cc (1 litre) per 2 metres, inject from both sides